d80c35984e
Develop the full Daisy Pod spike so it can be flashed the moment the board arrives. Architecture: one shared engine, two front-ends. - pm-synth: make it `#![no_std]` (mirroring track-format), routing float math through `libm` so the SAME f32 code runs on the host and on the Daisy's Cortex-M7F (hardware FPU — no fixed-point port needed). Add `Player`, a self-running sequencer that owns the Synth + scheduled clicks and renders sample-by-sample, looping at the pattern boundary. Integer-only hot path (clicks pre-resolved to sample indices); exposes a `fired()` beat counter. Add SPIKE_PROGRAM/SPIKE_BARS as the shared source of truth. - synthrender: render the SAME Player to pm-daisy-preview.wav — the host-side "simulator". Bit-identical preview of the hardware output (before its codec); far more useful than chip emulation (Renode can't model the audio codec). - pm-daisy (new, workspace-excluded firmware): thin BSP binary for the Daisy Seed/Pod. embedded-alloc heap + board bring-up + SAI-DMA audio interrupt feeding Player::next_sample() into stereo frames, USER LED flashing per click. Audio loop follows the `daisy` crate's examples/audio.rs. Board revision (codec) is a Cargo feature; README documents matching it + both flash paths (probe-rs/RTT and USB DFU) + the QSPI-bootloader fallback. Verified without hardware: host build + preview render (48 kHz, onsets on the 8th-note grid at 124 BPM); firmware cross-compiles + links for thumbv7em-none- eabihf at ~87 KB (fits the 128 KB internal flash) across all three codec revisions; track-format conformance + `node tests/run.mjs` (47 pass) still green. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
12 lines
704 B
Docker
12 lines
704 B
Docker
# Rust toolchain for the PM track-format crate (Stage 1 of the Rust port).
|
|
# Host-tested codec for now; the RP2350 firmware target is added for later stages.
|
|
FROM docker.io/library/rust:1-slim
|
|
|
|
# Firmware targets: Cortex-M33 (thumbv8m) for the RP2350 (pm-kit), Cortex-M0+ (thumbv6m) for the
|
|
# plain RP2040 (pm-grid / Pico Scroll Pack), Cortex-M7F (thumbv7em-eabihf) for the STM32H750
|
|
# (pm-daisy / Daisy Pod). Harmless for the host tests.
|
|
RUN rustup target add thumbv8m.main-none-eabihf thumbv6m-none-eabi thumbv7em-none-eabihf \
|
|
&& rustup component add llvm-tools-preview \
|
|
&& cargo install flip-link # stack-overflow-safe linker (overflow faults instead of corrupting statics)
|
|
|
|
WORKDIR /work/rust
|