New form factor: a plain RP2040 Pico + Pico Scroll Pack (PIM545) -- a 17x7
single-colour LED matrix + 4 buttons. The 7x17 matrix maps onto the editor's
lane x step pad grid.
- pico-scroll/: CircuitPython firmware (DEVICE_ID "G"). Engine/scheduler/SysEx/
live-sync copied verbatim from pico-explorer (engine byte-identical, so it stays
on the track-format conformance lineage); vendored bulk-framebuffer IS31FL3731
driver (pins/map verified from pimoroni-pico); three LED views (Grid/Pendulum/BPM);
4-button input. Audio over USB-MIDI (no onboard speaker); optional P_BUZZER.
- grid.html + info-grid.html: widget page (canvas mirrors the 3 LED views) + spec
page with a ~$29 BOM.
- Registered in build.sh (precompile + ASCII assert + pm_g1_circuitpy.zip), deploy.sh,
embed.js, embed.html, index.html gallery, and both editors' FW_PATHS (device id G).
- docs/rust-port.md: core/driver architecture (pm-core no_std engine+protocol; per-board
drivers behind embedded-hal/embedded-graphics traits). CLAUDE.md + livesync-protocol.md
note the new edition + device id.
Python firmware stays in parallel with Rust (no abandonment yet).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds pico-explorer/ as a parallel CircuitPython firmware target alongside the 52Pi
Kit in pico-cp/. Same engine, same program-string grammar, same programs.json, same
live-sync protocol. Read-only on the device (no on-device beat editing); the web
editor's Live sync mirrors all edits in real time and the Explorer emits its own
play/stop/bpm/sel deltas back.
Hardware (Pimoroni Explorer PIM744):
- RP2350B + 2.8" ST7789V 320x240 LCD (8-bit parallel; CircuitPython's official
board definition pre-builds the BusDisplay so we just use board.DISPLAY).
- 6 user buttons - A/B/C on the left of the screen, X/Y/Z on the right.
- Piezo speaker on GP12 (PWM) with amp enable on GP13.
- I2C QwSTEMMA on GP20/21 - reserved, unused by the firmware.
- No touchscreen, no joystick, no RGB LED. Run state shows on a tiny on-screen dot.
Buttons:
- A = play/stop. B = tap tempo. C = menu.
- X = prev track (hold-repeat). Z = next track (hold-repeat).
- Y = tempo -1 (hold-repeat; -5 after 1.5s).
- X+Z chord = tempo +1 (mirrors Y).
- In a menu: X/Z move the row cursor, Y decrements, A cycles/increments/selects,
B = back, C = close.
Files added:
- pico-explorer/{boot.py, code.py, app.py, programs.json, README.md}.
app.py = 1444 lines (~73KB source -> 29.8KB compiled .mpy).
- info-explorer.html.
Files touched:
- pico-cp/app.py: bump to 0.0.23. Version-query (SysEx 0x02 -> 0x03) reply now
includes the device id as "K;<version>" (backward-compat: editor parses
"contains ';'?" - old firmware sent bare version, treated as K).
- editor.html + editor-beta.html: _parseDeviceReply() splits id;version, FW_PATHS
maps id to .py/.mpy URL pair, so Update firmware now pushes the right binary.
- build.sh + deploy.sh: precompile pico-explorer/app.py -> dist/explorer-app.mpy,
zip pm_x1_circuitpy.zip alongside pm_k1_circuitpy.zip, ship
pico-explorer-app.{py,mpy} next to pico-cp-app.{py,mpy}.
- docs/livesync-protocol.md: new section 7 - per-device emit/apply matrix.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
New editor-beta.html: a bidirectional live mirror over the existing USB-MIDI
SysEx channel (0x7D). Either the website or the device can edit grooves, change
tempo/volume, start/stop, or select set-list items, and the other reflects it.
- src/livesync.js: LiveSync layer (opcodes 0x40 HELLO / 0x41 FULL / 0x42 DELTA /
0x43 BYE) riding the existing _ensureMidi/_send/onDeviceMidi plumbing. Fine
deltas for transport/bpm/vol/sel/beat, coalesced full-state for structural
edits; echo suppression via origin + _applyingRemote guard; device-authoritative
heartbeat reconciles drift. ?loopback=1 self-test mode (no hardware needed).
- editor-beta.html: copy of editor.html + "Live sync" toggle, SysEx routing,
and broadcast hooks at each mutation choke point (guarded by _applyingRemote).
- docs/livesync-protocol.md: wire spec + firmware checklist for pico-cp/app.py
(firmware half owned by the other instance — editor side + spec only here).
- build.sh / deploy.sh: add editor-beta.html to the build + version-stamp loops.
Editor side only; pico-cp/app.py untouched.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
